019570-B

PROFIBUS Master Simulator

The Master Simulator is an easy to use tool to test the PROFIBUS functionality of any fieldbus device. Two versions are available, one basic version for PROFIBUS-DP only, and a full version for both PROFIBUS-DP and DPV1.

aUTOMATIC SCAN The automatic Slave identification functionality permits communication to almost any PROFIBUS slave device even if the normally required GSD file is not available. So it is possible, to initialize a slave device step by step and finally read or write the I/O data.

The Master Simulator also permits the address assignment of the Profibus slaves via the bus and to display and analyse diagnostic messages of Profibus slaves on the screen

The connection to the Profibus interface of the slave device is made via an RS-232 to Profibus converter, which is built-in into a small D-SUB connector housing. This converter is connected to the PC´s COM-Port via a serial connection cable

Коммуникационные интерфейсы
Интерфейсы	USB 2.0 - Serial converter (High Performance)
Конструктив
Назначение	Адаптер
Серия	Anybus
Дополнительные аксессуары	USB-RS-232 configuration adapter (Order Code 019570)
Температура эксплуатации:	-0 to +55 °C
Комплект поставки	PROFIBUS Master Simulatorsoftware CD, connection cable to connect the converter to a PC COM-Port and an RS-232/PROFIBUS converter.
Габариты, мм	62 x 34 x 15
Гарантия от производителя	1 years
Сертификаты	CE,RoHS
Примечание	Connects Profibus-DP/DPV1 Master Simulator to the USB interface of a PC or Laptop

Написать отзыв

Ваше имя:


Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: