AB7612-B

AB7612-B
Производитель: HMS Industrial Networks AB (Швеция)
Модель: 14658-17
Артикул: AB7612-B
Наличие: Предзаказ
Кол-во:     - или -   В закладки
В сравнение
Anybus X-gateway – Modbus RTU Slave – J1939 The Anybus X-gateway J1939 Gateway provides connectivity between a Modbus RTU (serial) network and a J1939 Heavy Duty vehicle (CAN) network. The X-gateway appears as a Modbus Slave device allowing a Modbus Master to read or write data from the J1939 network. EASY CONFIGURATION - NO PROGRAMMING REQUIRED! HMS provides the X-gateway with a free Windows based configuration tool (BWConfig). This PC based software allows the user to map J1939 parameter (PGN) data into a range of memory addressable through the Anybus X-gateway Modbus RTU interface.

Configuration of the X-gateway is simple using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read or written from the J1939 network. BWConfig will then automatically map the I/O table to a range of addresses accessible from the Anybus X-gateway Modbus RTU interface.

The configuration is downloaded from the PC to the Anybus X-gateway via an RS232 connection and is saved in FLASH memory.

Коммуникационные интерфейсы
Интерфейсы Modbus-RTU Slave-J1939
Управляемый: via 9-pin DSUB RS-232 port with the included BWConfig Windows software
Конструктив
Назначение Шлюз Modbus-RTU Slave
Серия X-gateway
Степень защиты корпуса: IP20, NEMA rating 1
Конструкция корпуса: Aluminium
Гальваническая изоляция YES, on both BUS/Ethernet side
Возможности монтажа DIN-rail (EN 50022 standard)
Температура хранения -25 to +85 ℃ or -13 to +185°F
Комплект поставки Resource CD with "BWConfig" Windows software,Manuals, RS-232 configuration cable, Installation Guide, 5-pole 5.08 mm Phoenix pluggable screw J1939 connector 2-pole 5.08 mm Phoenix pluggable screw connector (Power supply not included)
Температура эксплуатации: 0 to +70 ℃ or +32 to +158°F
Вес, кг. 500g or 1,10 lbs
Габариты, мм 126 x 110 x 42mm or 4,96 x 4,33 x 1,65"
Гарантия от производителя 3 years
Сертификаты CE,CULUS
Питание
Входное напряжение питания DC: 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Ток потребления: max. 300mA (Typical 200mA)

Написать отзыв

Ваше имя:


Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке:



Описание

Anybus X-gateway – Modbus RTU Slave – J1939 The Anybus X-gateway J1939 Gateway provides connectivity between a Modbus RTU (serial) network and a J1939 Heavy Duty vehicle (CAN) network. The X-gateway appears as a Modbus Slave device allowing a Modbus Master to read or write data from the J1939 network. EASY CONFIGURATION - NO PROGRAMMING REQUIRED! HMS provides the X-gateway with a free Windows based configuration tool (BWConfig). This PC based software allows the user to map J1939 parameter (PGN) data into a range of memory addressable through the Anybus X-gateway Modbus RTU interface.

Configuration of the X-gateway is simple using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read or written from the J1939 network. BWConfig will then automatically map the I/O table to a range of addresses accessible from the Anybus X-gateway Modbus RTU interface.

The configuration is downloaded from the PC to the Anybus X-gateway via an RS232 connection and is saved in FLASH memory.

Характеристики

Коммуникационные интерфейсы
Интерфейсы Modbus-RTU Slave-J1939
Управляемый: via 9-pin DSUB RS-232 port with the included BWConfig Windows software
Конструктив
Назначение Шлюз Modbus-RTU Slave
Серия X-gateway
Степень защиты корпуса: IP20, NEMA rating 1
Конструкция корпуса: Aluminium
Гальваническая изоляция YES, on both BUS/Ethernet side
Возможности монтажа DIN-rail (EN 50022 standard)
Температура хранения -25 to +85 ℃ or -13 to +185°F
Комплект поставки Resource CD with "BWConfig" Windows software,Manuals, RS-232 configuration cable, Installation Guide, 5-pole 5.08 mm Phoenix pluggable screw J1939 connector 2-pole 5.08 mm Phoenix pluggable screw connector (Power supply not included)
Температура эксплуатации: 0 to +70 ℃ or +32 to +158°F
Вес, кг. 500g or 1,10 lbs
Габариты, мм 126 x 110 x 42mm or 4,96 x 4,33 x 1,65"
Гарантия от производителя 3 years
Сертификаты CE,CULUS
Питание
Входное напряжение питания DC: 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector
Ток потребления: max. 300mA (Typical 200mA)

Написать отзыв

Ваше имя:


Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке:



ХОЛИТ Дэйта Системс, корпоративный сайт © 2024
All Rights Reserved HOLIT Data Systems Ltd. - Design by HOLIT