AB7665-C
Модель: 14702-17
Артикул: AB7665-C
Наличие: Предзаказ
В сравнение
The Anybus X-gateway allows you to monitor and control data on a J1939 heavy duty vehicle network from an Ethernet-based PLC system or device. The EtherNet/IP and Modbus TCP protocols are supported.
FAST COPYING OF I/O DATA Data from J1939 messages are mapped to I/O table locations, making them accessible to the Ethernet network. The X-gateway acts as an EtherNet/IP Adapter, allowing J1939 data to be transferred to an EtherNet/IP Scanner device using I/O or explicit messages. The module acts as a Modbus TCP server, allowing J1939 data to be addressed as Modbus registers by a Modbus TCP client device.EASY CONFIGURATION - NO PROGRAMMING REQUIRED! HMS provides the X-gateway with a free Windows based configuration tool (BWConfig). This PC based software allows the user to map J1939 parameter (PGN) data into a range of memory addressable through the X-gateway Ethernet interface.
Configuration of the X-gateway is simple using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read or written from the J1939 network. BWConfig will then automatically map the I/O table to a range of addresses accessible from the X-gateway Ethernet interface.
| Коммуникационные интерфейсы | |
| Интерфейсы | EtherNet/IP Slave-J1939 Slave |
| Управляемый: | via 9-pin DSUB RS-232 port with the included BWConfig Windows software |
| Конструктив | |
| Назначение | Шлюз EtherNet/IP Slave |
| Серия | X-gateway |
| Степень защиты корпуса: | IP20, NEMA rating 1 |
| Конструкция корпуса: | Aluminium |
| Гальваническая изоляция | YES, on both BUS/Ethernet side |
| Возможности монтажа | DIN-rail (EN 50022 standard) |
| Температура хранения | -25 to +85 ℃ or -13 to +185°F |
| Комплект поставки | Resource CD with "BWConfig" Windows software,Manuals, Installation Guide, 5-pole 5.08 mm Phoenix pluggable screw J1939 connector 2-pole 5.08 mm Phoenix pluggable screw connector (Power supply not included) |
| Температура эксплуатации: | 0 to +70 ℃ or +32 to +158°F |
| Вес, кг. | 500g or 1,10 lbs |
| Габариты, мм | 126 x 110 x 42mm or 4,96 x 4,33 x 1,65" |
| Гарантия от производителя | 3 years |
| Сертификаты | CE,CULUS |
| Питание | |
| Входное напряжение питания DC: | 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector |
| Ток потребления: | max. 300mA (Typical 200mA) |
Написать отзыв
Ваше имя:Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.
Оценка: Плохо Хорошо
Введите код, указанный на картинке:
Описание
Anybus X-gateway – Ethernet Adapter/Server – J1939The Anybus X-gateway allows you to monitor and control data on a J1939 heavy duty vehicle network from an Ethernet-based PLC system or device. The EtherNet/IP and Modbus TCP protocols are supported.
FAST COPYING OF I/O DATA Data from J1939 messages are mapped to I/O table locations, making them accessible to the Ethernet network. The X-gateway acts as an EtherNet/IP Adapter, allowing J1939 data to be transferred to an EtherNet/IP Scanner device using I/O or explicit messages. The module acts as a Modbus TCP server, allowing J1939 data to be addressed as Modbus registers by a Modbus TCP client device.EASY CONFIGURATION - NO PROGRAMMING REQUIRED! HMS provides the X-gateway with a free Windows based configuration tool (BWConfig). This PC based software allows the user to map J1939 parameter (PGN) data into a range of memory addressable through the X-gateway Ethernet interface.
Configuration of the X-gateway is simple using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read or written from the J1939 network. BWConfig will then automatically map the I/O table to a range of addresses accessible from the X-gateway Ethernet interface.
Характеристики
| Коммуникационные интерфейсы | |
| Интерфейсы | EtherNet/IP Slave-J1939 Slave |
| Управляемый: | via 9-pin DSUB RS-232 port with the included BWConfig Windows software |
| Конструктив | |
| Назначение | Шлюз EtherNet/IP Slave |
| Серия | X-gateway |
| Степень защиты корпуса: | IP20, NEMA rating 1 |
| Конструкция корпуса: | Aluminium |
| Гальваническая изоляция | YES, on both BUS/Ethernet side |
| Возможности монтажа | DIN-rail (EN 50022 standard) |
| Температура хранения | -25 to +85 ℃ or -13 to +185°F |
| Комплект поставки | Resource CD with "BWConfig" Windows software,Manuals, Installation Guide, 5-pole 5.08 mm Phoenix pluggable screw J1939 connector 2-pole 5.08 mm Phoenix pluggable screw connector (Power supply not included) |
| Температура эксплуатации: | 0 to +70 ℃ or +32 to +158°F |
| Вес, кг. | 500g or 1,10 lbs |
| Габариты, мм | 126 x 110 x 42mm or 4,96 x 4,33 x 1,65" |
| Гарантия от производителя | 3 years |
| Сертификаты | CE,CULUS |
| Питание | |
| Входное напряжение питания DC: | 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector |
| Ток потребления: | max. 300mA (Typical 200mA) |
Написать отзыв
Ваше имя:Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.
Оценка: Плохо Хорошо
Введите код, указанный на картинке: