Твердотельный диск M.2-SATA (NGFF) 4GB M.2 (S42) 3SE (DEM24-04GD07SCADB)
Модель: 4744-03
Артикул: DEM24-04GD07SCADB
Наличие: Предзаказ
В сравнение
Innodisk M.2 (S42) 3SE is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of
Innodisk M.2 (S42) 3SE is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk M.2 (S42) 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
| Память | |
| ATA Security | Y |
| Capacity | 4GB~32GB |
| External DRAM Buffer | N |
| Flash Type | SLC |
| H/W Write Protect | N |
| Interface | SATA III 6.0 Gb/s |
| Max. Channels | 2 |
| Max. Power Consumption | 1.2 W (3.3V x 366 mA ) |
| MTBF | >3 million hours |
| S.M.A.R.T. | Y |
| Sequential R/W (MB/sec, max.) | 290 / 130 |
| Storage Temperature | -55°C ~ +95°C |
| Thermal Sensor | ST- Optional / WT- Default |
| Type | Standard |
| Тип | M.2 (S42) 3SE |
| Стандарт | SLC |
| Объем | 04GB |
| Количество чипов | 2 |
| Скорость считывания (MB/S) | 220 |
| Скорость записи (MB/S) | 50 |
| Конструктив | |
| Model Name | M.2 (S42) 3SE |
| Shock | 1500G@0.5ms |
| Vibration | 20G@7~2000Hz |
| Назначение | Standard Grade. 0℃ ~ 70℃ |
| Серия | M.2-SATA (NGFF) |
| Габариты, мм | 22.0 x 42.0 x 3.5 |
| Примечание | Standard Grade. 0℃ ~ 70℃ |
Написать отзыв
Ваше имя:Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.
Оценка: Плохо Хорошо
Введите код, указанный на картинке:
Описание
Твердотельный дискInnodisk M.2 (S42) 3SE is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of
Innodisk M.2 (S42) 3SE is designed as the standard M.2 form factor with SATA interface, and supports SATA III standard (6.0Gb/s) with excellent performance. The form factor refers to the M.2(NGFF) specification which established by JEDEC. Regarding of mechanical interference, Innodisk M.2 (S42) 3SE absolutely replaces the traditional hard disk and makes personal computer, in any field, smaller and easier.
Innodisk M.2 (S42) 3SE effectively reduces the booting time of operation system and the power consumption is less than hard disk drive (HDD), and complies with ATA protocol, no additional drives are required, and can be configured as a boot device or data storage device.
Характеристики
| Память | |
| ATA Security | Y |
| Capacity | 4GB~32GB |
| External DRAM Buffer | N |
| Flash Type | SLC |
| H/W Write Protect | N |
| Interface | SATA III 6.0 Gb/s |
| Max. Channels | 2 |
| Max. Power Consumption | 1.2 W (3.3V x 366 mA ) |
| MTBF | >3 million hours |
| S.M.A.R.T. | Y |
| Sequential R/W (MB/sec, max.) | 290 / 130 |
| Storage Temperature | -55°C ~ +95°C |
| Thermal Sensor | ST- Optional / WT- Default |
| Type | Standard |
| Тип | M.2 (S42) 3SE |
| Стандарт | SLC |
| Объем | 04GB |
| Количество чипов | 2 |
| Скорость считывания (MB/S) | 220 |
| Скорость записи (MB/S) | 50 |
| Конструктив | |
| Model Name | M.2 (S42) 3SE |
| Shock | 1500G@0.5ms |
| Vibration | 20G@7~2000Hz |
| Назначение | Standard Grade. 0℃ ~ 70℃ |
| Серия | M.2-SATA (NGFF) |
| Габариты, мм | 22.0 x 42.0 x 3.5 |
| Примечание | Standard Grade. 0℃ ~ 70℃ |
Написать отзыв
Ваше имя:Ваш отзыв: Примечание: HTML разметка не поддерживается! Используйте обычный текст.
Оценка: Плохо Хорошо
Введите код, указанный на картинке:
